Your Gainesville home.
Your next roof, made clear.
A leak, an aging roof, or a project you are finally ready to plan. Start with a clear picture of your roof and a local team that can explain what comes next.
A real conversation about your roof. Call 352-664-8585.
Brehm project photo, Gainesville, Florida, September 2026
Start with the story of your Gainesville roof.
Brehm’s Gainesville office is at 1344 NW 121st Way. Whether you are repairing one area or considering a full replacement, the most useful starting point is the history of your own property: earlier repairs, existing materials, and the places where water has appeared.
Put the paperwork in one place.
Gainesville’s building guidance points homeowners toward a written project scope and existing permit records. Gather any roof invoices, warranty documents, and permit numbers you have. Missing records are a question to raise, not a reason to guess at the roof’s age.
Make the inspection specific to your home.
Tell the inspector where you noticed a stain, which rooms sit below it, and whether it appears only during certain storms. Share photos taken safely from the ground. Ask which building authority handles the address before work is scheduled.
Talk through your property with BrehmA Gainesville roof has to earn its keep.
Gainesville roofs take a beating from Florida sun, summer storms, and year-round humidity. Over time that shows up as worn asphalt shingles, algae staining, lifted edges, and moisture that travels far from where it started. When you call Brehm, you are talking with a local team based at 1344 NW 121st Way — licensed as both a Certified Roofing Contractor (CCC1336098) and a Certified General Contractor (CRC1334991), insured, and able to pull permits on your behalf.
We install and repair systems built for this climate, including Owens Corning asphalt shingles and metal options from Florida suppliers. As an Owens Corning Roofing Platinum Preferred Contractor, we can offer extended manufacturer warranty options on qualifying systems — not just a contractor promise. On the job, a bilingual crew leader and a site supervisor stay with the work, and we photo-document progress so you can see what was done, not guess.
Most homeowners want a clear timeline. About 94% of our roofing projects are fully completed within 36 hours of crew arrival, with cleanup and a magnetic nail sweep before we leave. Whether you need a targeted repair or a full replacement in shingle, metal, or tile, the starting point is the same: a free inspection focused on your address, then a written scope you can actually compare.
Roofing services for Gainesville.
Roof replacement
Understand the scope from the existing roof to the finished system.
02 / ROOFING SERVICESRoof repair
Start with the cause and a clearly explained repair recommendation.
03 / ROOFING SERVICESMetal roofing
Explore the profile, finish, and details of a metal roof.
04 / ROOFING SERVICESStorm damage
Discuss what changed and the next steps for your property.
05 / ROOFING SERVICESCommercial roofing
Plan around the building, its use, and the proposed work.
06 / ROOFING SERVICESNew construction
Coordinate the roof with the plans for your new building.
Real work. More to look at.
Explore the project photography, then ask how the details apply to your own home.
Shingle roof, front exterior view in Gainesville, FloridaArchitectural shingles, elevated roof view in Gainesville, Florida
Shingle roof, multiple slopes and ridge view in Gainesville, FloridaBrehm project photos taken in Gainesville, Florida. Photographed October 2026 and September 2026. Dates are CompanyCam capture dates, not completion dates.
Hear from Brehm customers on Google.
Live reviews from homeowners across North Central Florida, straight from Google.
Gainesville roofing questions.
Have a question about your own property? Bring it to the conversation.
Ask BrehmWhere is Brehm’s Gainesville office?
Brehm Roofing & Restoration lists its office at 1344 NW 121st Way, Gainesville, FL 32606. Call 352-664-8585 to discuss your property and arrange an inspection. Confirm appointment availability with the team before planning your day around a visit.
Should I bring old roof records to the inspection?
Yes, if you have them. Prior invoices, repair photos, permit numbers, and warranty documents can help explain the roof’s history. You do not need to estimate dates you cannot confirm. Tell the inspector what is known and which details are uncertain.
Can my roof be repaired instead of replaced?
That depends on the roof’s condition and the cause and extent of the problem. Ask Brehm to explain the inspection findings, what a repair would address, and why a broader scope may be recommended. A photo or the age alone does not settle that decision.
What will my roof project cost?
The written scope determines the price. Roof size and design, material choices, existing conditions, access, and related work can all affect the proposal. Ask for an estimate specific to your property and compare what is included before comparing the total.
What brought you here today?
Choose the concern closest to yours. Get a useful starting point for the conversation.
Find the cause before choosing the fix.
The mark on a ceiling is a starting point. A roof inspection helps connect what you can see inside with the conditions above it.
- Note when the leak appears and which room is affected.
- Gather photos you can take safely from the ground.
- Ask what the proposed repair addresses and what remains.
Compare the roof system, not just the surface.
A replacement proposal should explain the work beneath and around the visible roofing material, along with the material itself.
- Ask how existing decking will be evaluated.
- Discuss flashing, underlayment, and ventilation.
- Clarify cleanup, documentation, and warranty terms.
Record what changed. Start on the ground.
Share the changes you noticed after the storm, including new stains or visible damage. An inspection is the next step in understanding the condition.
- Take photos only from a safe location.
- Note the date and what you observed.
- Call Brehm to discuss the property and available next steps.
Make the first conversation count.
You do not need to arrive with the roof already figured out. Bring your goals, the property details, and the questions you want answered.
- Share your plans for the home or building.
- Gather any prior repair and warranty records.
- Compare options after the roof condition is understood.
These prompts help you prepare. An inspection determines the condition and recommended scope.
Find the right conversation for your roof.
A visual guide to roofing materials and the questions behind each choice.
A familiar look, with details worth comparing.
Explore color and profile alongside the complete installation scope. Ask which product is proposed and how the surrounding roof-system components are handled.
A different profile. A complete-system conversation.
Discuss panel style, finish, attachment, and how transitions will be detailed. The right comparison includes your roof geometry and the proposed installation, not only the material name.
Start with suitability for the structure.
If you like the shape and character of tile, ask whether it fits your roof design and structure. Confirm applicable property guidance and the proposed supporting roof system.
The roof’s shape changes the conversation.
A low-slope section needs an approach suited to its design. Ask about the proposed system, drainage, penetrations, and transitions to adjoining roof areas.
Material illustrations are simplified studies, not product samples. Confirm suitability, colors, and specifications with Brehm.
Your roof is more than the top layer.
Explore the parts that belong in a complete roofing conversation.
The part you see every day.
Shingles, metal, tile, and other systems give the roof its visible surface. Product selection belongs alongside the roof design and the details underneath.
A useful question:
Which product is proposed, and why does it fit this roof?
A layer beneath the visible covering.
Underlayment is part of the roof assembly beneath the primary covering. Ask which product and installation details are included in the scope.
A useful question:
What underlayment is included in the proposal?
Pay attention where materials meet.
Roof-to-wall transitions, edges, and penetrations deserve specific attention. Ask how the proposal handles these details and any existing flashing.
A useful question:
Which flashing will be replaced, and which will be evaluated?
The surface that supports the assembly.
Existing decking is a key part of the inspection and project conversation. Ask how concealed conditions will be handled if they become visible during the work.
A useful question:
How will any additional decking work be documented and approved?
Part of the whole-roof conversation.
Discuss the existing intake and exhaust arrangement and how it relates to the proposed roof. The appropriate approach depends on the building and roof design.
A useful question:
How is ventilation being evaluated for this property?
Your address starts the plan.
Our office is in Gainesville. The map shows the city for orientation; it does not represent a guaranteed response radius.
Open the area in Google MapsA map for orientation around your property.
Bring questions.
Leave with a clearer plan.
A little preparation makes the conversation more specific to your home. Use the checklist, save a copy, and bring the questions that matter to you.
Arrange your free inspectionTell Brehm about the property and the concern you want investigated.
Ask what the inspection shows and which details affect the recommendation.
Review the proposed scope and ask for clarification before choosing the next step.
Pick a start date, get the permit and written scope in hand, and receive CompanyCam photos as the work is completed.
Your inspection checklist
0 / 6Download a blank checklist with six questions for your inspection. Interactive selections require JavaScript.
Your checklist is not sent to Brehm. Download a copy to keep it.
Let’s make a plan for
your Gainesville roof.
Start with a free inspection and a conversation about your home.