A product-specific proposal
Identify the panel manufacturer, profile, finish, and supporting assembly. “Metal roof” alone leaves important choices unanswered.
Metal roofing · North Central Florida
A different profile.A roof that fits your home.
Explore the look and details of a metal roof with Brehm. Compare panel styles, finishes, and the roof-system decisions behind the clean lines you see from the street.
Gainesville office · 352-664-8585
Know what comes next.From the first question to the project plan.
Brehm project photography
Owens CorningPlatinum Preferred Contractor
Florida contractorCCC1336098 & CRC1334991
Based in GainesvilleServing North Central Florida
The details behind the decision
Three things to get clear on.
Transitions deserve attention
Roof-to-wall connections, valleys, edges, and penetrations need details appropriate to the selected system and the building.
Compare actual samples
Screen colors are an introduction. Review physical samples, product documents, and any property restrictions before committing to a finish.
The metal conversation
Metal that fits Florida weather — and the elevation of your home.
Homeowners around Gainesville often look at metal when asphalt has taken too many years of sun, rain, and wind. A metal roof is still a system: panel profile, finish, underlayment, attachment method, and the details at valleys, walls, edges, and penetrations. “Metal” alone is not a scope — Ribbed, 5V, PBR, and standing seam each look and install differently, and the right choice depends on slope, building use, and the look you want from the street.
Brehm installs metal for residential and commercial projects using Florida suppliers such as Tri County Metals, Metal Ops, and Mission Metals. We help you compare actual manufacturer samples (screens lie), walk permitting requirements, and put the full assembly in writing. Same credentials as every Brehm job: CCC1336098 and CRC1334991, insured with workers’ comp, bilingual crew leadership on site, and photo documentation of the work.
Ask the practical questions early: Is this standing seam or exposed fastener? How are panels attached on this slope? What finish warranty and care guidance come with the product? About 94% of our roofing projects finish within 36 hours of crew arrival once materials and scope are set — but metal still needs periodic attention at fasteners, seams, and transitions. Call 352-664-8585 with your address and photos of the elevations that matter most; we will help you choose a profile that fits the house, not just a catalog page.
A closer look
Real work. More to look at.
Explore the project photography, then ask how the details apply to your own home.
From Brehm’s project collection. Photos are not assigned to a specific service-area city.
Hear from Brehm customers on Google.
Live reviews from homeowners across North Central Florida, straight from Google.
Before you decide
Metal roofing questions.
Useful answers to start with. Your property and proposed scope make the conversation specific.
Talk with BrehmWhat is the difference between standing seam and exposed fasteners?
Standing-seam systems typically conceal panel fasteners beneath the seams or adjacent panels. Exposed-fastener systems use visible fasteners through the panels. The exact attachment and detailing depend on the product, so compare the specified systems rather than the names alone.
Is a metal roof maintenance-free?
No roofing material removes the need to pay attention to roof condition. Follow the selected manufacturer’s care guidance and ask about inspection of fasteners where applicable, transitions, penetrations, and finishes.
Can metal work on every roof slope?
Suitability depends on the specific panel system, roof slope, substrate, and installation requirements. Ask Brehm which system fits your roof and review the applicable manufacturer guidance. Do not assume all metal profiles can be used interchangeably.
Are the colors on this page actual product colors?
The interactive colors are visual studies. Screens, lighting, and materials change how a finish appears. Ask Brehm for actual manufacturer samples and the available finish options for your selected panel.
Planning tools
What matters most to you?
Choose a starting point and see which questions belong in the conversation.
Your starting point
Look at the profile and the whole elevation.
Panel shape, rib spacing, finish, and roof geometry work together. Start with the architectural look you want, then compare actual manufacturer samples for your property.
Bring this questionHow will this panel profile look at the roofline and visible transitions?
Your starting point
Understand the system beneath the profile.
Standing-seam and exposed-fastener systems handle panel attachment differently. The product and its application determine the details, including clips, fasteners, transitions, and allowable slope.
Bring this questionWhich panel system is proposed, and how is it attached?
Your starting point
Plan for care as well as installation.
Ask about the product’s care guidance, finish warranty, and inspection needs. A metal roof still has seams, transitions, and penetrations that belong in the maintenance conversation.
Bring this questionWhich components should be checked over time?
A visual starting point
Try the profile. Explore the finish.
These studies help you explore the look. Actual products and samples guide the final selection.
Illustrative material study
Standing seam
Clean seams. Concealed panel attachment.
The raised seams create the panel rhythm. Main panel fasteners are concealed within the system; the exact attachment and transition details depend on the selected product.
- Compare the specified profile and seam.
- Ask about attachment and roof slope.
- Review actual finish samples.
Illustrative material study
Exposed fastener
Visible attachment. A different panel detail.
Visible panel fasteners are part of this profile’s appearance and assembly. Compare the specific panel, fastener details, installation scope, and product care guidance.
- Identify the proposed panel system.
- Discuss fasteners, seals, and transitions.
- Ask which details need attention over time.
Charcoal · illustration only
Illustrations are not manufacturer samples, product specifications, or a promise of available finishes.
Take the conversation with youYour project.
Your project.
Your questions.
Use this metal roofing checklist to prepare. Add the questions you want answered and download your notes before talking with Brehm.
Get a free roof inspectionMake the inspection specific.
Share the property address, what you have observed, and any known roof history. The findings help shape the next step.
Your project checklist
0 / 6Download a blank checklist with six questions for this service. Interactive notes require JavaScript; nothing entered on this page is saved without it.
These notes are not sent to Brehm. Download a copy to bring to your conversation.
Let’s talk about
your roof.
Bring your questions. We’ll start with your property and the next step.